Honeycomb Electric Field Special High Voltage Power Supply 300W 500W 800W Power

Cellular Electric Field Dedicated High Voltage Power Supply 300W 500W 800W Power

For low-altitude emission fume purifiers used for more than 6 months, the filter screens and electrode plates at both ends of the flange should be disassembled and cleaned. Then, perform a high-voltage circuit test on the entire unit. It can be put into use after reaching the rated voltage.

When installing the low-altitude emission fume purifier, ensure that the product is level, aesthetically pleasing, well-insulated, and that the chassis is grounded. The output high-voltage wires must have protective tubing to ensure good insulation, and the insulation resistance must be ≥2MΩ. When maintaining the low-altitude emission fume purifier, the power must be cut off. Non-electrical maintenance personnel are not allowed to open the electrical box. The electrical box should have a waterproof canopy, and water must not enter the high-voltage electrostatic generator during cleaning.

Cellular Electric Field Dedicated High Voltage Power Supply 300W 500W 800W Power